字體大小: 字級放大   字級縮小   預設字形  

詳目顯示

以作者查詢圖書館館藏以作者&題名查詢臺灣博碩士以作者查詢全國書目
研究生中文姓名:沈憲忠
研究生英文姓名:Shen, Syan-Jung
中文論文名稱:無線功率傳輸降壓轉換器設計
英文論文名稱:Design of Buck Power Converters in Wireless Power Transmission
指導教授姓名:吳政郎
口試委員中文姓名:教授︰杜國洋
教授︰陳松雄
教授︰鄭錦聰
教授︰吳政郎
學位類別:碩士
校院名稱:國立臺灣海洋大學
系所名稱:電機工程學系
學號:40443015
請選擇論文為:應用型
畢業年度:106
畢業學年度:105
學期:
語文別:中文
論文頁數:47
中文關鍵詞:無線功率傳輸IPT切換式電源PID控制
英文關鍵字:Wireless power transmissionIPTSwitching power supplyPID control
相關次數:
  • 推薦推薦:0
  • 點閱點閱:43
  • 評分評分:系統版面圖檔系統版面圖檔系統版面圖檔系統版面圖檔系統版面圖檔
  • 下載下載:7
  • 收藏收藏:0
本文研究的主要目標在於探討無線電源傳送方法,以及二次測接收功率後如何利用DC-DC降壓轉換器提供穩定之輸出電壓。首先,由數學模式分析線圈耦合與共振系統之基本特性,以及buck電路的基本原理;接續選取最合適的電感、電容值,透過軟體模擬確認該零件值之效果,並利用軟體模擬找出DC-DC降壓轉換器之最佳KP、KI、KD值。最後藉由TI-TMS320F28377S控制板撰寫PID控制程式控制整體系統,進行實體電路測試,驗證實作與模擬之差異性。
The main goal of this thesis is to explore the wireless transmission power method, and the design of DC-DC buck converter to provide a stable constant output voltage. Firstly, the fundamental characteristics of the coil coupling and resonance systems are analyzed. In addition, a buck circuit is analyzed by using its mathematical model. Secondly, the values of inductances and capacitances values are chosen and verified through software simulations. Moreover, optimal values of controller parameters for the DC-DC buck converter are also determined by software simulation. Finally, we use a TMS320F28377S control board to control the switching of wireless power transmission circuit and implement a PID controller to control the buck converter.
第一章、緒論:
說明本論文研究動機與目的、文獻回顧、論文架構。
第二章、數學基礎:
說明本論文將使用到之數學引理。
第三章、DC-DC降壓轉換器原理與分析:
說明無線功率傳與DC-DC降壓轉換器之工作原理。
第四章、硬體架構:
介紹本論文所使用之微控制器與相關的硬體架構。
第五章、無線功率傳輸與DC-DC降壓轉換器之PID模擬與實測:
針對無線功率傳輸與DC-DC降壓轉換器之切換系統模型設計具備PID
控制法則,並以電路模擬以及實作加以驗證。
第六章、結論:
結論與未來展望。


[1] Kurs, A., Karalis, A., Moffatt, R., Joannopoulos, J. D., Fisher, P., & Soljačić, M. (2007). "Wireless power transfer via strongly coupled magnetic resonances." Science, 317(5834), pp. 83-86.
[2] Choi, B., Cha, H., Noh, J., & Park, S. (2001). "A new contactless battery charger for portable telecommunication/computing electronics." In Consumer Electronics, 2001. ICCE. International Conference on pp. 58-59. IEEE.
[3] Jang, Y., & Jovanovic, M. M. (2003). "A contactless electrical energy transmission system for portable-telephone battery chargers." IEEE Transactions on Industrial Electronics, 50(3), pp. 520-527.
[4] Li, H. L., Hu, A. P., Covic, G. A., & Tang, C. (2009, February). "A new primary power regulation method for contactless power transfer." In Industrial Technology, 2009. ICIT 2009. IEEE International Conference on pp. 1-5.
[5] Thrimawithana, D. J., & Madawala, U. K. (2010, March). "A primary side controller for inductive power transfer systems." 2010 IEEE International Conference on Industrial Technology (ICIT), pp. 661-666.
[6] Neath, M. J., Swain, A. K., Madawala, U. K., & Thrimawithana, D. J. (2014). "An optimal PID controller for a bidirectional inductive power transfer system using multiobjective genetic algorithm." IEEE Transactions on Power Electronics, 29(3), pp.1523-1531.
[7] Thrimawithana, D. J., & Madawala, U. K. (2013). "A generalized steady-state model for bidirectional IPT systems." IEEE Transactions on Power Electronics, 28(10), pp.4681-4689.
[8] Cuk, S. (1977). "Modelling, analysis, and design of switching converters" (Doctoral dissertation, California Institute of Technology).
[9] Zhou, C., Zhang, Q., Ezechias, D. D., Gao, Y., Deng, H., & Qu, S. (2014, June). "A general digital PID controller based on PWM for buck converter." 2014 11th World Congress on Intelligent Control and Automation (WCICA), pp. 4596-4599. IEEE.
[10] Lee, S., & Burm, J. (2011, June). "A DC-DC buck converter with using a digital PID regulator based on a simple control algorithm." 2011 10th International Symposium on Signals Circuits and Systems (ISSCS), pp. 1-4. IEEE.
[11] Chander, S., mod Agarwal, P., & Gupta, I. (2010, December). "FPGA-based PID controller for DC-DC converter." 2010 Joint International Conference on Power Electronics, Drives and Energy Systems (PEDES) & 2010 Power India, pp. 1-6. IEEE.
[12] Sun, T., Xie, X., & Wang, Z. (2013). "Wireless power transfer for medical microsystems." New York: Springer.
[13] 梁適安,交換式電源供應器之理論與實務設計,全華科技圖書股份有限公司。
[14] 李可唯,兩輪式倒單擺之網路回授控制器實現,國立臺灣海洋大學電機工學系碩士論文,2012。
[15] 曹德偉,直流-直流降壓轉換器之強健切換法則設計,國立臺灣海洋大學電機工學系碩士論文,2015。
[16] TMS320F28377S Delfino Microcontrollers Technical Reference Manual, Texas Instruments Inc.
[17] TLP250 Datasheet, Toshiba, Download by:
http://toshiba.semicon-sorage.com/info/docget.jsp?pid=TLP250&lang=en&type
=datasheet
[18] [PDF] 如何消除返馳式轉換器於啟動期間MOSFET之過應力
http://www.google.com.tw/url?sa=t&rct=j&q=&esrc=s&source=web&cd=1&ved=0ahUKEwip7cKlk73UAhWDerwKHTU3DA4QFgglMAA&url=http%3A%2F%2Fwww.richtek.com%2F~%2Fmedia%2FAN%2520PDF%2FAN010_TW.pdf&usg=AFQjCNERIwuig2ebPFb7tX2VTguvf24gfw&sig2=CkEB0rxtGKBr7UQsNeyrPA
電子全文
全文檔開放日期:2017/07/21
 
 
 
 
第一頁 上一頁 下一頁 最後一頁 top
* *